Table Saw Safety and Operation Test
2025-2026. Questions & Correct
Answers. Graded A
A push stick must be used if material is less than _______ inches in width.
- ANS6
After a cut has been completed, what should the operator do before leaving
the Table Saw? - ANSMake sure the saw blade has stopped turning.
Personal protective equipment which SHOULD BE worn when operating
the Table Saw is/are ... - ANSEar protectors, safety glasses ("both b and c)
The accessory used when crosscutting on the Table Saw is the ... -
ANSMiter head.
The arbor nut on a Table Saw is tightened only when ... - ANSThe electrical
service is disconnected at the circuit breaker.
The maximum distance the rip fence can safely be set from the saw blade
is ... - ANSThe distance measured when the carriage is flush with the end
of the front rail.
The miter head and right hand table slot are recommended for use when ...
- ANSCompound bevel crosscuts are to be made.
