Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

"Industrial Load Management System Using MQTT Protocol for Real-Time Energy Optimization ", Thesis of Industrial management

The "Industrial Load Management System Using MQTT Protocol for Real-Time Energy Optimization and Control" focuses on enhancing energy efficiency in industrial environments by leveraging the lightweight MQTT protocol. This system enables seamless real-time communication between industrial devices and all control units, allowing for effective monitoring, scheduling, and management of electrical loads. By integrating IoT sensors and MQTT-based messaging, it ensures safe, Secure reliable data transmission and responsive load control. The approach helps industries reduce peak demand, avoid overloads, and improve overall energy usage efficiency. This solution is scalable, cost-effective, and suitable for smart factories aiming for sustainable and intelligent energy operations.

Typology: Thesis

2017/2018

Available from 07/11/2025

karthick-raja-2208
karthick-raja-2208 🇮🇳

108 documents

1 / 2

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
pf2

Partial preview of the text

Download "Industrial Load Management System Using MQTT Protocol for Real-Time Energy Optimization " and more Thesis Industrial management in PDF only on Docsity!

CHAPTER 6 CONCLUSION The Industrial Load management using NoT (Industrial Internet of Things) by TS information MOQTT protocol provides the basic Paramete about the industry to the industrialist from any place through intemet. It also. pr ovides a option for the industrialist to control the loads in the industry from any pl} ace. The control of various loads in the industry can thus be controlled both manually and aut omatically by this project which gives high flexibility to the manager, It upgrades the industrialist knowledge about the industry time to time and also to decide about w hich load to be operated depending upon his needs. In future the proposed system can be further developed into a complete three phase system with few changes like inclusion of additional current. sensors and voltage sensors and then controlling the motor by Variable Frequency Drive (VFD), Then the outputs cantaken in the form of datashect and can be used for testing purpose of the additional loads. 49 REFERENCES Apastasi, G-- Corucci. F., and Marceltoni, F.(201 1), “An imelligent system for Jectrical energy management in buildings” elec “e Applications. Vol.12. No.3, pp.32-36. Boukerche, H.(2009). “Algorithms & protocols for Wircless.mobile Ad Hoc johnwiley& sons.inc... Vol.21, No.4, pp.56-63. Intelligent: Systems Design and networks K tikRathod, J.andVrushank Shah, M.2012), al “Wireless Automation using industrial protocols’, Vol.23, No.6, pp.213-217. nD Kawka, p.and Ploplys, N. (2004), ‘Closed-Loop Control over Wireless Networks’ JEEE Control Systems Magazine, Vol.45, No.1 > Pp.32-35. Ramos, P. and Serra, A. (2006), “A new calibration method for current and voltage Sensors used in power quality measurements’ IEEE \nstramentation and Measurement Technology Conference Proceedings, pp.10-13. Marcus Arthur, F.and Robert Cliche, A. (2014), ‘A world of Industnal protocols and its applications’, Vol.32, No.2, pp.43-45. 50